When the mTouch is in thermostat mode, you can choose which zones and macro-zones appear on the screen. This is useful when the device is installed in a specific room and you want occupants to see only the controls for that room.
Steps:
- Make sure the mTouch is in thermostat mode (see “How to use Thermostat Mode on the mTouch”).
- Tap the three-dots menu in the top-right corner of the zones list.
- Tap “Hide zones / macro-zones“.
- Enter the PIN when prompted.
- Toggle each zone or macro-zone on or off. Use the “All” toggle at the top to control all zones at once.
Your changes take effect immediately.
Example:
If the mTouch is installed in the kitchen, toggle off all zones except "Kitchen" so occupants can only see the kitchen controls.